| Step | | Procedure & Parts & Tools |
| 1 |
|
DRAIN THE TANKS IF FULL. USE 13MM SOCKET TO REMOVE BOLT THAT SECURES THE TANK. OPEN TANK TO GAIN ACCESS TO TOP OF BRUSH DECK
| Ratchet-Socket metric 13mm |
|
|
| 2 |
|
REMOVE THE CASTER AND ITS 2 ALLEN HEAD BOLTS FROM THE BRUSH HEAD SHROUD.
| Wrench-Allen metric 5.0mm |
|
|
| 3 |
|
REMOVE THE REMAINING SHROUD BOLTS ON EACH SIDE OF THE MACHINE
| Wrench-Allen metric 5.0mm |
|
|
| 4 |
|
LIFT BRUSH SHROUD OFF DECK. IT MAY BE EASIER IF THE DECK IS LOWERED
|
| 5 |
|
INSPECT THE BELT COMING OFF THE MOTOR. LOOK FOR CRACKS OR FRAYING. NOTE, MOTOR SHOWN REMOVED FOR A CLEARER VIEW (REMOVING MOTOR WILL NOT BE NECESSARY)
|